Axis Communications AXIS 2420 Installing on a Network, Shown below Window Syntax, Example

12 Installing on a Network AXIS 2420 User’s Manual

Installing on a Network

•Macintosh users - Please refer to Notes for Macintosh Users, on page 53.

•Easy installation - Use The AXIS IP Installer. See Using the AXIS IP Installer, on page 52.

•Quick installation - Follow the instructions below to install the AXIS 2420 on an Ethernet network.

❶Fit or replace a lens (if required). The lens is fitted by

turning it in a clockwise direction.

❷Note the Serial number on the underside of the unit. You need to know this to set the IP address.

Serial number same as Ethernet address; e.g.

00408c100086 =

00-40-8c-10-00-86

❸Using an appropriate method for your operating system, assign your product with a unique IP address from a computer on your network, as follows:

Windows only - Start a DOS window and type in the commands	UNIX only - Type these commands in the command
shown below:	window:
Syntax:	Syntax:

arp -s <Camera IP address> <Ethernet address> <my PC IP address> ping -t <Camera IP address>

Example:

arp -s <IP address> <Ethernet address> temp ping <IP address>

Example:

arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193	arp -s 172.21.1.200 00:40:8c:10:00:86 temp
ping -t 172.21.1.200	ping 172.21.1.200

Note: In some Unix systems, the arp command can be located in a directory that is not on the command path.

You will now see ‘Request timed out...’ messages repeatedly returned in the window.

❹Connect an Ethernet cable to your AXIS 2420 and attach it to the network.

Network Connector

RJ-45 Connector