Axis Communications AXIS 2420 user manual Adjusting the DC-Iris Settings

AXIS 2420 User’s Manual Lenses and Advanced Focusing 57

5.Finally, turn the lens slowly towards the Far-focus (F, ∞ ) position, until the Status Indicator displays Green; that is, until a Good level of focus is achieved.

Notes: •A Good level of focus is normally achievable throughout several planes within the focusing

range of the camera.

•The Status Indicator displays Green to indicate a Good level of focus at 80% of optimum focus.

•Since optimum focusing is dependent upon the camera’s field of view, it is important to scan the focusing plane from the furthest to the closest perspectives before attempting any fine-tuning.

6.Return to your browser and review the picture quality. Repeat step 5 only if you consider the focal distance too distant - until you are satisfied with both the focal-distance and focus-quality.

7.To exit the Focus Assistant: press and hold the Control button - until the Status Indicator flashes Yellow. The Status Indicator displays Green when the Focus Assistant is closed.

Adjusting the DC-Iris Settings

The DC-Iris settings must be adjusted to meet the requirements of the lens you intend to use. You will need to modify the Exposure Control and other related settings for your camera, from the Image-Advancedpage.

Use the information presented in the following tables to choose the appropriate settings for your lens type.

Caution!

Exposing your camera to bright sunlight may cause permanent damage to the CCD if you:

•install and use a non-DC Iris lens with the product, or

•select anything other than DC-Irisin the Exposure Control settings of the Image - Advanced page.

Axis consequently advises extreme caution when changing the lens and/or when using the Advanced settings. Damage caused to the AXIS 2420 through overexposure to direct sunlight or halogen light is not covered under the product warranty.