Axis Communications AXIS 2420 Verifying and Completing the Installation From Your Browser

AXIS 2420 User’s Manual Installing on a Network 13

❺ Attach the external Power Supply to the unit and connect it to your local mains supply.

❻ Approximately 10-15 seconds after connecting the power
supply, the message ‘Reply from 172.21.1.200...’
- or similar, is returned in the DOS/command window. Ensure
that the Power Indicator is permanently lit and that the Net-	Power Supply
work Indicator flashes intermittently.	Connector

❼Exit ping. The installation is complete, and you are now ready to

access the AXIS 2420 from your browser, as described in the next	Power Indicator
section.	Network Indicator

Verifying and Completing the Installation From Your Browser

❶ Start your browser and enter the IP address of your AXIS 2420 in the location/address field.

❷Click the Installation Wizard. The wizard guides you through the remaining installation procedures.

Important!

•Upon delivery, the AXIS 2420 is configured for open access (anonymous users). The unit is supplied with one pre-configured Administrator username and password, set to root and pass, respectively. The Administrator password must be changed immediately to prevent unauthorized access to the Admin Tools and/or product images, as defined in the Security Settings.

•To enable the updating of images in Microsoft Internet Explorer, set your browser to allow ActiveX controls and perform a once-only installation of Axis' ActiveX component onto your workstation. If your working environment restricts or prohibits the downloading of additional software components, you can alternatively, from the Image Settings, configure your AXIS 2420 to use a Java applet for updating the images. Refer to the on-line Help for more information.