Parts, controls and connectors

7.USB upstream port

USB 1.1 standard is supported.

Connect this connector to the PC USB bus if you wish to connect USB devices to the display’s USB downstream port.

8.DC power input

Connect the external power supply, delivered with the display, to this connector.

Use supplied power supply only.

9.Tilt & swivel foot clip

The display is shipped with this clip in the foot to protect the tilt & swivel mechanism during transport. After unpacking, you should remove this clip.

Do not throw the clip away! Should the display have to be packed and shipped later, the clip must be applied to the foot again.

10.Slot for security cable (e.g., Kensington lock)

28

Page 28
Image 28
Barco E-2320 C (SE) system manual USB upstream port USB 1.1 standard is supported