Installing your Barco display controller
Figure 3: BARCOMED CORONIS PCIe display controller VGA Jumper, VGA enabled
Note: To use multiple BARCOMED CORONIS PCIe display controllers in a single host, you need to enable VGA on only ONE of the BARCOMED CORONIS PCIe display controllers and disable VGA on ALL the other BarcoMed display controllers. To use a BARCOMED CORONIS PCIe display controller with a third party VGA controller or with one or more BARCO NIO MXRT display controllers, do NOT enable VGA on the BARCOMED CORONIS PCIe display controller.
Which PCIe slot to use
The table on the preceding page lists the different model display controller(s) available for your BARCO NIO Display System and the recommended PCIe slot to use for optimum performance. Figure 4 shows the three different types of PCIe slots.
x16 slot
x8 slot
x1 slot
Figure 4: Examples of PCIe slots
Quick installation
Experienced users and system administrators can follow these brief instructions for installing the display controller(s) for your BARCO Display System in the shortest possible time.
33
