MSWU-81E 07/08/2013 7
2.General
3. Take out the projector.
After unpacking let the projector acclim atizes to a room temperature higher then 10°C (50°F) and lower
then 40°C (104°F). Neglecting this may result in a start up fai lure of the Light Processor Unit.
Save the original shipping carton and pa cking material, they will be necessary if you ever have to sh ip your
projector. For maximum protection, repack your proj ector as it was originally packed at the fac tory.
The lens is delivered in a separate box.
2.3 Initial inspection

General

Before shipment, the projector was inspec ted and found to be free of mechanical and elec trical defects. As soon as the
projector is unpacked, inspect for any dama ge that may have occurred in transit. Save all packing mater ial until the inspection
is completed. If damage is found, file claim with car rier immediately. The Barco Sales and Service offi ce should be notified as
soon as possible.

Box content

After unpacking the projector it is recomm ended to check if all following items where includ ed:
• Three power cords
• One DVI-D to HDMI cable
• CD (Contents has this installation manual)
• One Safety manual
• One remote control unit (RCU)
• Two AAA size batteries for the RCU
Two lamps are mounted inside the lamp house at deliver y. The projector lenses are not included in the
package of the projector.