MSWU-81E 07/08/2013
38

7.Input

7.2 Input Selection
Use this function to specify the source of ima ge connected to the rear of the projector. For instance, if you h ave connected
your PC as the video input source, you can choose RG B D-15(RGB-HV/SOG) to be the input for image projection. Options of
input available on the projector includ e: HDMI1, HDMI2, RGB D-15(RGB-HV/SOG), YUV1(RGB-S), YUV2(RGBHV/
YUV2).
7.3 Input Configuration
Select Input Configuration from the Adv anced menu to choose the color space of the source signa l for HDMI, VGA, and
component connections.
The default setting, Auto, functions as fol lows:

AUTO

The Auto setting determines the correct color s pace to use. If it does not, you can force the MSWU-81E to use a specific color
space. Choose one of the following:
• REC709 sets the color space matrix to that defined in IT U-R BT.709.
• REC601 sets the color space matrix to that defined in ITU- R BT.601.
• RGB-PC uses RGB color space and sets black at 0,0,0 RGB and white at 255,255,255 RGB.
• RGB-Video uses RGB color space and sets black at 16,16,16 RGB and white at 235,235,235.

HDMI

For component SDTV and EDTV resolutions, Y UV STD is used. For other component video resolutions, YUV HD is used.

VGA

YUV STDis used for SDTV and EDTV sources, and Y UV HD for all other sources.

Component

For SDTV and EDTV resolutions, uses the YU V STD. For all other resolutions YUV HD is used.
7.4 Input Locking

What is possible?

The output signal can be locked on an internal sy nc signal or on the sync signal of one of the inp ut sources. Or it can follow
the input of the Main window or Pip window. When locked to th e corresponding input sync, the outpu t will be shown without
movement artifacts. With lockin g to a specific input, a set of projectors can be kept in syn c, no matter what input image is
shown.
Use this function to specify the frequ ency of the image input signal. You can let the projec tor determine the optimal
projection frequency or force the projector to project image at the frequency you specify.

Auto

The preset value for this function is Auto. If you specify vertical refresh frequency f rom the input device to be between
48~62Hz, the projector will automatically lock the freq uency of the input signal so that both signal i nput and output will be
refreshed at the same frequency in order to achieve o ptimal image output. If the frequency of th e input signal falls between
24~31Hz, the projector will automatically double the vertical refresh fre quency. If the frequency of the input signal f alls
between 31~48Hz or exceeds 62Hz, the projector will automatically set th e frequency to 60Hz.

48Hz, 50Hz, 60Hz

Choose this option to set image output frequen cy at 48Hz, 50Hz or 60Hz
If you enable PIP, the projector will automatically synchronize th e frequency of the PIP input signal with
the main input signal.