MSWU-81E 07/08/2013 31
5. Getting Started
5.3 Power on projectorHow to power on.
Press the power switch at the back of the projector to switch on t his projector.
- When ’0’ is pressed, the projector is switched off.
- When ’1’ is pressed, the projector is switched on.
The projector starts up in stand by. The menus are accessible via the local LCD panel.
The start up screen is displayed on the local LCD p anel and when fully started up, it changes to t he
overview screen.
When the projector is turned off, it is required to wai t for at least 90 seconds to re-start the projecto r to
complete the cooling of lamp.
Starting image projection via the standby key.
Press key once on the local keypad or on the remote control.
How to switch to standby
Press 2x power button to go to standby, after first push then push a gain to power of projector, the message is displayed.
The projector goes to standby.
All custom settings are written to the internal ba ckup device. A message ’Saving data ...’ indicates
this process. Never switch off the projector while t his message is displayed.
When switching to standby, an after cooling process will st art to cool down the projector. The after cool
time depends on the temperature inside the proje ctor and can vary from 30 second to 5 minutes.
5.5 Power off projectorHow to power off
1. Press first Standby.
2. Let cool d own the projector until the fan speed decrease s. At least 5 minutes.
3. Switch of f the projector with the power switch. ’0’ must be presse d.
CAUTION: Never switch off the projector whil e the message ’Saving data ... ’ is displayed !