Barco MSWU-81E 1. SAF ETY

MSWU-81E 07/08/2013 1

1. SAF ETY

Read this chapter attentively. It contains important inform ation to prevent personal injury while inst alling and using a

MSWU-81E projector. Furthermore, it includes several ca utions to prevent damage to the MSWU-81E projector. Ensure that

you understand and follow all safety guide lines, safety instructions and war nings mentioned in this chapter before instal ling

your MSWU-81E projector. After this chapter, additional “warnings ” and “cautions” are given depending on the instal lation

procedure. Read and follow these “warnings” and “cautions ” as well.

When referring in this document to the term “IMPRE SS SERIES” means that the content is applicable for follow ing Barco

products:

- MSWU-81E

WARNING: Ensure you understand and follow all the safety guid elines, safety instructions, warn ings

and cautions mentioned in this manual.

WARNING: Be aware of suspended loads.

WARNING: Wear a hard hat to reduce the risk of personal injury.

WARNING: Be careful while working with heavy loads.

WARNING: Mind your ﬁngers while working with heavy load s.

CAUTION: High pressure lamp may explode if improperly handled.

• Before operating this equipment please read this ma nual thoroughly and retain it for future reference.

• Installation and preliminary adjus tments should be performed by qualiﬁ ed Barco personnel or by authorized Barco ser vice

dealers.

• All warnings on the projector and in the d ocumentation manuals should be adhered to.

• All instructions for operating and u se of this equipment must be followed precisely.

• All local installation codes should be ad hered to.

This equipment is built in accordance with the requi rements of the international safety standards IE C60950-1,

EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information techno logy

equipment including electrica l business equipment. These safety sta ndards impose important requireme nts on the use of

safety critical components, materials and i nsulation, in order to protect the user or operator aga inst risk of electric shock and

energy hazard and having access to live parts. Safet y standards also impose limits to the internal a nd external temperature

rises, radiation levels, mechanical stabil ity and strength, enclosure construct ion and protection against the risk of ﬁre.

Simulated single fault condition testing ens ures the safety of the equipment to the user even whe n the equipment’s normal

operation fails.

1.SAFETY