MSWU-81E 07/08/2013 17
3.Physical Installation
Please make sure the center of lens is retangular to the center of the screen.
• Moving the lens horizontally
The distance of horizontal lens movement is 30% of half th e screen width in both directions. For insta nce, if you are using
a 80" × 50" screen, you will be able to move the image left or r ight by no more than 12".
Range of
horizontal
lens shift
adjustment
Range of
horizontal
lens shift
adjustment
This illustration shows normal horizont al lens shift without the use of special spe cification lens or projector.
3.3 Connecting the projector with the power net
CAUTION: Use only the power cord provided with the proje ctor.
1. Ensure that the power switch stands in the ’0’ (OFF) position (1).
2. Con nect the female side of the power cord with the power input s ocket of the projector (2).
3. Se cure the power plug by locking the plug hold er clamp (3).
Connect to Wall plug
4. Conn ect the male side of the power cord to the local power net.