7. Configurator, Projector alignment settings
What is the Basic Principal of ScenergiX ?
The principle of edge blending is achieved by linear modulation of the li ght output in the overlap zone so
that the light output in that zone equals the light output of the rest of the image.
Adjustable overlapping area
50%
100%
50%
100%
image 2image 1
image 2image 1
Light output per image
Total composite light output
Image 7-14
ScenergiX Basic Principle
7.7.2 Preparations
ScenergiX Preparations
Toensure proper Scenergi Xa djustment, be sure that the following adjustments are done perfectly on all
projectors:
• Convergence
• Geometry
• Color Matching (Color Temperature, Color Standard, Input Balance, Gamma)
7.7.3 ScenergiX activation
How to enable or disable ScenergiX
1. Toenable Scener giX, check the check box in front of enable.
Todisable Scener giX, uncheck the check box in front of enable. (image 7-15)
When enabled, Show alignment lines becomes available.
2. Todisplay alig nment lines on the screen, check the check box in front of Show alignment lines.
R5976924 PROJECTOR TOOLSET 16/04/2009 101