Barco R5976924 8.5.4 Edit Input settings Adjustable items, How to edit

8. Configurator, Projector adjustment settings
4. Click on the desired file in the list (e) and click Open or Select (f).
When a standard file is selected or a not matching custom file, Projector Toolset will ask to create a
new custom source file by copying the settings of the selected file into the custom file.
5. Click OK to create a new custom source file. If Can cel ispressed the previous selected file is loaded
again.
The new created filecanbeedited.
Image 8-12
Load file from all files
8.5.4 Edit Input settings
Adjustable items
•Totalhori zontal pixels: total horizontal pixels in the source. If the value is wrong, sampling mistakes
(small vertical bars in the projected image) will be seen in the image.
•Activehorizontal pixels: determine th ew idth of the window on the screen. This va lue is normally given
inthesourcespecifications. If not, adjustuntil full image height is disp layed (no missing lines).
•Horizontal start in pixels: number of pixel s between the beginning of the input signal and the start of
the video information in the signal.
•Totalvertic al pixels: total vertical pixels in the source.
•Active vertical pixels: number of vertical pixels determining the height of the projected image . This
valueisnormallygiveninthespecificationsof the source. If not, adjust until full image height is dis-
played (no missing lines)
•Vertical start in pixels: number of pixels betw een the start of the input signal and start of the image on
the screen.
• Horizontal period in nanoseconds.
How to edit
1. Select first a window.
120 R5976924 PROJECTOR TOOLSET 16/04/2009