5. Configurator
When adding twice the same projector,once v ia anetwork connection and once via a
serial connection, a message will be displayed to warn the user that there is already an
instance with the same projector and that problems with the communication are pos-
sible. The projector will be added but Projector Toolset advises to uninstall one of the
connections.
5.4.2 General properties
Overview
Click on the General tab to open the general properties if not yet open (a).
Image 5-4
General projector properties
Projector’s identication
The default display name is Barco followed by the projector type.
This name can be changed to any other name. Click in the name eld, select the current n ame and enter
a new name (b).
Next to the displayname, the device type is indicate with the name and a device icon.
Projector status
Indicatesthe communication status of the projector (c).
enabled: communication with projectorpossible
disabled: no communication wi th projector possible
5.4.3 Connection setup
Overview
Set up a serial connection
Set up a Ethernet connection
48 R5976924 PROJECTOR TOOLSET 16/04/2009