Barco R5976924 6.8.5 Minimum frame delay Purpose, How to toggle the delay

6. Configurator, General projector settings
Image 6-16
Image load mode
6.8.5 Minimum frame delay
Purpose
In normal mode, the processing (scaling and de-interlacing) in DLP projectors intr oduces a few frames
delay (from input to screen). Setting the optio n MinimumDelay to "ON" disables all scaling and de-inter-
lacing in the processing and reduces frame delay of the projector (from input to scree n) to ONE frame,
caused by the formatter board (DLP technology restriction). The intended use of this option is to apply
native and progressive data to the projector and displaying it with minimum delay, using the full resolution
of the projector. Other formats will be displayed either unscal ed and/or interlaced.
This feature can be used if additional delay in the projector is not acceptable. Forinstance if a projector
is showing the DVI loop out of another DLP or if an external scaler/de-interlacerdoes the processing.
How to toggle the delay
1. Click on Advanced (a). (image 6-17)
The Advanced control dialog box opens.
2. Toset up the Minimum frame delay setti ng, check the radio button of your choice (b).
On frame delay reduced with one frame.
Off no reduction
R5976924 PROJECTOR TOOLSET 16/04/2009 83