Barco R5976924 8.5.1 Introduction About les, Types of source les, 8.5.2 Loading a tting input le Load via Load icon

8. Configurator, Projector adjustment settings
• Input color temperature
8.5.1 Introduction
About files
Beforeanewsourcecanbeused,acorrectfilehas to installed. The projector’s memory contains a list of
files corresponding to the most used sources. When the source corresponds with one of these files, the
file can be loaded and saved for future use. W hen there is a little difference, the filecanalsobeloaded
and then edited until the source specs are reached.
Types of source files
When opening the list of source files, you will recognize 2 types of source files:
• system source files (default available in the projector’s mem ory)
• custom source files
Thecustom sourcefiles with the same n ame of the system source filesareindicatedwithaindexnumber
between brackets.
8.5.2 Loading a fitting input file
Load via Load icon
1. Select first a window.
2. Click on Select file icon (a). (image 8-10)
TheLoad(fit) dialog box opens (b).
Only thebest fitting files are displayed. Files with a digit between brackets are custom source files. All
others are standard source files.
3. Select a file from the list (c).
4. Click Open or Select to load the selected file (d).
When a standard file is selected or a not exactly match ing custom file, Projector Toolset will ask to
create a new custom file bycopying the settings of the selected file into the custom file.
5. Click OK to continue.
The new createdcustom source file is loaded and can be edited if necessary
Image 8-10
Load fitting filevia load ic on
118 R5976924 PROJ ECTOR TOOLSET 16/04 /2009