Barco R5976924 Via a projector scan single connection

5. Configurator
4. Click in the input field and enter the host name (d).
5. Click OK to make the connection.
Image 5-8
Create connectionvia host name
Making a connection via a host name is only possiblewhen the host name is known by
the network DNS server.
Via a projector scan single connection
1. Select the Connection properties tab (a). (image 5-9)
The right pane changes to the connection setup page.
2. Click on theradio button next to A projector connected on the netw ork to select the Ethernet connection
(b).
3. Click on the Device scan button (c).
The Scanning projector progress bar appears. The broadcast quer y (based on UDP) for projectors
scans the complete LAN network to detect available projectors on the network. The scanning results
are displayedin the Discover projectors dialog box (d). Only the projector of the added projector type
and the not yet added projectors to the configuration are in the list.
4. Click on the desiredIP address to select (e) and click Open (f).
A connection is made with the selected projector.
R5976924 PROJECTOR TOOLSET 16/04/2009 53