6. Advanced
2. Press →to se lect the Display setup item
3. Press ↓to Pull down the Display setup menu
4. Use ↑or ↓to select Status bar position
5. Press ENTER
6. Use ↑or ↓to position the status bar
6.9.7 Sliderbox position
What can be done ?
Thesliderbox can be displayed anywhere on the screen, the position can be set in this menu.
How to reposition the sliderbox?
1. Press MENU to activate the Tool bar
2. Press →to se lect the Display setup item
3. Press ↓to Pull down the Display setup menu
4. Use ↑or ↓to select Sliderbox position
5. Press ENTER
Asliderbox is displayed. Use the 4 arrow keys to drag the box to the desired position.
Image6-110
There is a coarse and a fine adjustment of the position, use ENTER (when sliderbox is displayed) to switch
between the two.
6.9.8 AutoImage Setup
What can be done ?
Autoimageallows to detect automatically the characteristics of the source (total pixels per line,...) and uses this information to adapt
the image to the LCD panels.
Autoimage can adapt the image based on following data :
• Totalpixels per line
•Startpixel
•Phase
• Contrast/brightnesslevels
Autoimage works only for data signals.
How to set up AutoImage?
1. Press MENU to activate the Tool bar
2. Press →to se lect the Display setup item
3. Press ↓to Pull down the Display setup menu
4. Use ↑or ↓to select AutoImage setup
5. Press ENTER
R59770134 ID LR-6 27/05/2011 99