6. Advanced
7. Press ENTER
The logo display is only possible in the full screen mode, a logo can thus not be displayed (rescaled) in a
windowin the PiP mode.
Whenthere is no signal connected, the projector will also start itsstandby timer countdown (if enabled) and
shuts down after the predetermined time.
6.7 Lamp management
6.7.1 Runtimes
How to display the lamp runtimes ?
1. Press MENU to activate the Toolbar
2. Press →to select the Lamp item
3. Press ↓to Pull down the Lamp menu
4. Use ↑or ↓to select Runtimes
Image6-78
5. Press ENTER
A textbox is displayed
Image6-79
6.7.2 Mode
What are the different lamp modes ?
Single mode
Theprojector will always switch to the lamp with the shortest runtime when the difference between the runtimes oflamp1 and lamp
2reaches 100 hours, switching from one lamp to another happens only at switching on of the projector and not during operation.
84 R59770134 IDLR-6 27/05/2011