Barco R9010342 HowtolaunchAutoImage?, 6.8.3 Edit le What can be done with the Edit le menu ?, How to edit a le ?

6. Advanced
Themeas ureof thetotal number of pixels per line can be done through2 m ethods
• Limited scan: a windowing is used to allow fast tracking.
The operation takesabout 20 sec onds(d epending on file)
• Full scan: tracking is done over the full range.
The operation takesabout 1.5 minutes (depending on file)
HowtolaunchAutoImage?
1. Press MENU to activate the Tool bar
2. Press →to select the Image files item
3. Press ↓to Pull down the Image files menu
4. Use ↑or ↓to select Auto Image
5. Press →to open the menu
6. Use ↑or ↓to select the desire d file scan method
Image6-88
7. Press ENTER
A text box showing a progressbar is displayed.
Image6-89
Tip: Press the Cancel button to cancel the operation.
TheAu to Image setup in the Display setup menu affect only Auto Image if it is launched via theRCU key or at
automatic file creation.
LaunchingAutoImag e viathe menu involves complete checking of all parameters.
AutoImage can also be launchedvia the RCU with the ded icatedAutoImage key.
6.8.3 Edit file
What can be done with the Edit file menu ?
TheEdit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specifications before enteringthe data.
How to edit a file ?
1. Press MENU to activate the Tool bar
R59770134 ID LR-6 27/05/2011 89