6. Advanced
Notethat here the blanking is only done on the display i.e. the setting is not saved in the image file. in other
wordsonly one type of blanking (setting) can be done independently of the source.
How to blank the image ?
1. Press MENU to activate the Toolbar
2. Press →to se lect the Display setup item
3. Press ↓to Pull down the menu
4. Use ↑or ↓to select Blanking
5. Press ENTER
A slider box is displayed
Image6-113
6. Use ←or →, the numeric keys on the remote, or the keypad to change the blanking.
Use the checkboxes to enable/disablethe b lanking
Use the Reset key to reset the blanking values.
The logo is also affectedby the blanking
6.9.10 Soft Edge
Overview
• Introduction
• Soft Edge overlap zone (horizontal Soft Edge)
• Soft Edge border adjustment
• Black level of the images
6.9.10.1 Introduction
Why Soft Edge?
Whenworking in a multichannel setup the projector and its Soft Edge possibilities allow an image blending that gives the appearance
of a single view.
R59770134 IDLR-6 27/05/2011 101