6. Advanced
If the AutoImage function does not succeed in finding a file and no file is loaded (load list is empty), which
means that the source is not displayed, then use the copy function: Copy a standar d file(.std) which is not
toodifferent of the source to display, then editthis file to get the best image.
6.8.6 Delete
How to delete a file ?
1. Press MENU to activate the Tool bar
2. Press →to select the Image files item
3. Press ↓to Pull down the Image files menu
4. Use ↑or ↓to select delete
Image6-103
5. Press ENTER
A dialog box is displayed
Image6-104
6. Use ↑or ↓to select the desired file
7. Press ENTER
The selected file is deleted and is remov ed from the list
6.8.7 Forced file load
What can be done ?
Forced file load allows to force or lock one particularc ustom fileto beloaded for one particular input. Thisway one can guarantee
thatthe same desired file is always used for a particular source.
Foreach layer (layer 1, layer 2, layer 3) we can enable or disable the forced file load. The specification for the file to be selected for
each inputon that layer is done via RS232.
seethe RS232 U ser Guide for more information on the Forced file load command to be sent.
How to set a file to be loaded ?
1. Press MENU to activate the Tool bar
R59770134 ID LR-6 27/05/2011 95