6. Advanced
On the screenappe arsnow the selected source.
The Barco logo on the menu indicates the presence of a signal, thedigit indicates the shortcut key on the
RCU.
The3 first sources (Data on BNC’s, Component Video & RG(s)B) refer to the 5-cable input, the position ofthe
indication“1” will always show which BNC configuration is selected.
When to select “Data on BNC’s”
SelectData on BN C’swhen a data signal is connected to the BNC’s
When to select “Component video” ?
SelectComponent video when a video signal of the type (R-Y/Y/B-Y) is connected on the BNC’s.
When to selectRG sBVideo?
SelectRG sB Video when an RGB video signal (15 KhZ) with Sync on green or sync on H is presented on the BNC’s.
Thissignal is routed to the video circuit and is projected in a Video Window.
6.2.2 Composite VideoHow to select one of the 7 composite video inputs ?
1. Press MENU to activate the Tool bar
2. Press ↓to Pull down the Source Selection menu
3. Use ↑or ↓to select Composite video
4. Press →to Pull down the submenu
5. Use ↑or ↓to select one of the different video inputs
Image6-5
Note: Video2is an optional Video input and is only displayed in case the optional Video/Audio layer is installed.
If the extended mode is disabled, the submenu contains only 1 selection (2 selections if the Audio & Video option is
installed).
6. Press ENTER to confirm your choice
A whitebullet indicates the selected composite video source which now appears on the screen.
Adjustments on a Composite video signal
Thep rojectorsallows different adjustments on a composite video signal. Depending on the type ofs ignal(NT SC /PAL)the termi-
nology may differ:
• Contrast
• Brightness
• Color: adjuststhe level of color saturation in a PAL signal
• Tint: adjusts the level of color saturation inanNTSCsignal
• AGC:Automatic Gain Control
R59770134 IDLR-6 27/05/2011 43