4. Setup
4.5 Projector address
What can be done ?
The projector is shipped with projector address set to ”0”
Insome cases the projector address m ust be changed, for example if an unique RCU is used to control 2 or more projectors (inde-
pendently).
Inthe OSD me nu Projector Address,t he following addresses can be programmed :
• Projectoraddress: addressdefined by the user, may be from 0 to 255
0-9is used for RCU communication, 0–255 being used for RS232 serial communication.
• Common address : address may be 0 or 1

How to change the projector’s RC5 address ?

1. Press MENU to activate the Tool bar
2. Press →to select the Ins tallation
3. Press ↓to Pull down the In stallation menu
4. Use ↑or ↓to select Projector address
Image4-5
5. Press ENTER
A dialog box appears on the screen.
Image4-6 Image4-7

Entering the new projector address ?

1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.

How to change the common RC5 address ?

1. Press MENU to activate the Tool bar
2. Press →to select the Ins tallation
3. Press ↓to Pull down the In stallation menu
4. Use ↑or ↓to select Projector address
5. Press ENTER
30 R59770134 IDLR-6 27/05/2011