4. Setup
A dialog box appears on the screen.

Enteringthe new common address ?

1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
Thisad dress mustb e between 0 or1.
4.6 Orientation

Projector orientations

Dependingon how the projector is oriented, the projector’s internal settings have to be adapted.

How to change the orientation ?

1. Press MENU to activate the Toolbar
2. Press →to select the Installation item
3. Press ↓to Pull down the In stallation menu
4. Use ↑or ↓to select Orientation
5. Press →to pull down the menu
6. Use ↓or ↑to select the desired orientation
Image4-8
7. Press ENTER
The projection is adapted and a black bullet shows the active configuration.
4.7 Adjusting the lens

What must be done ?

Depending on the projectiondistance and the lens used, the imag e may not be at the desired size, position and/orm ay be out of
focus.
Theprojector will always allow you to shift your image vertically as well as horizontally (when available) to position it on the screen.
Inaddition, motorized lenses will also allow you to Zoom andfocus the ima ge.
Allthese lens parameters can be adjusted using the RCU, the local keypad or in the Installation menu of the projector’s OSD.
• Zoom (only for motorized lenses)
• Focus (only for motorized lenses)
• VerticalShift
R59770134 ID LR-6 27/05/2011 31