6. Advanced
Image6-76
7. Press ENTER
A white bullet shows the activeeffect.
The next source switching willbe done using the selected effect
The Randomm ode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive sources witchings with the same effect.
The Seamless switchingmo deis not used in the Random mode.
The switchingeffects are only possible in the full screen mode
When the source switching mode is the fade in/out mode, the audio (when available) switching will also be
doneusing a fade in/out effect.
6.6.2 BackgroundPurpose
Ifthere is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background
settings.
How to change the background ?
1. Press MENU to activate the Toolbar
2. Press →to select the Signal item
3. Press ↓to Pull down the Signal menu
4. Use ↑or ↓to sele ct Background
5. Press →to pull down the menu
6. Use ↑or ↓to select the desired background
Image6-77
R59770134 IDLR-6 27/05/2011 83