6. Advanced
Selecta coordinate that is present in the common gamut e.g. withthe desired values for red set to x=633 and y= 328.
650640
310
320
330
660
Rc R1
R2
Image6-51
Selecta coordinate that is present in the common gamut
7. Repeat step 5 to 6 for all coordinates on both projectors.
Both projectorswill now operate within the same color gamut.
Anotherway to determine the new coordinates isto use the DynacolorTool (softwaretool running on a laptop
orPC), contact Barco for more information.
6.4.9 Blanking
Blanking in the Image menu
Theblanking in general allows to blank unwanted video information (noise in the top or bottom of the image).
Theblanking in the image menu is the same as in the Display settings menu except for the fact that here the blanking settings are
storedin the image files. In other words each custom file or source has its own blanking values.
See the blanking procedure in the Displayse ttingsmenu.
If the selected source is not entirely displayed always check first the blanking settings in the image menu
sincethe active custom file may conta ins blanking.
6.4.10 Input balance
Introduction: Unbalanced color signals
Whentransporting signals, there is always a risk of deterioration of the information contained in the signals.
Thealterations of the three color signals will happen independently i.e. the colors will end to be unbalanced,
BBlack level
0.7V
Image6-52
70 R59770134 ID LR-6 27/05/2011