Belkin 5216K, IP 5232K user manual Setting the IP Address, Installation, sections

INSTALLATION

Table of Contents sections 1 2

Setting the IP Address

By default, the Switch boots with an automatically assigned IP address from a DHCP (Dynamic Host Configuration Protocol) server on the network. The DHCP server provides a valid IP address, gateway address, and subnet mask.

You can identify the IP address from the OSD at the local position. You can set the IP address locally via the OSD where there is no DHCP server as follows:

1.From the local keyboard, press “Scroll Lock”. The OSD Main window appears (see Figure 10).

Figure 10 OSD Main window

3 4 5 6

2.Press “F2”. The Settings window appears (see Figure 11).

Figure 11 Settings window

In the Settings window, navigate downward using the Tab key. At the bottom of the window, press “Tab” to go to the top of the window. Change settings by typing in the selected area or by pressing the space bar—whichever is relevant.

OmniViewIP 5216K/5232K 13