Belkin IP 5232K, 5216K user manual Installation, sections, Changing the network parameters

INSTALLATION

Table of Contents sections 1 2 3 4 5 6

Changing the network parameters

Enable DHCP – When a DHCP server is active on the same network to which the Switch is connected, DHCP provides automatic IP assignment.

When DHCP is disabled (Recommended) – You can assign a fixed IP address to the Switch.

Consult your network administrator regarding the use of the DHCP.

When DHCP is disabled, enter the IP Address, Subnet Mask, and

Gateway as given by your network administrator.

Once the IP address is satisfactory, log in to the web interface to complete the configuration, as explained in the next section. (Network parameters can also be changed from the remote GUI as explained on page 17).

OmniViewIP 5216K/5232K 14