Belkin IP 5232K Connecting to a target server, Configuring the System, Network Configuration

WEB INTERFACE

Table of Contents sections 1 2

Connecting to a target server

To connect to a target, click the desired target in the Server Name column. The screen of the target appears inside the remote console window. The “Accessing a Target Server” section on page 28 explains how to conduct a remote session. The following sections first explain how to configure the system.

Configuring the System

Configuring the system includes setting network parameters, user and security settings, and maintenance.

From the menu, click “Configuration”. The “Network > Configuration” page, including the Configuration menu, appears:

Figure 15 Network > Configuration page

3 4 5 6

Network > Configuration

Consult your network administrator for the network settings if necessary.

Device Name – Type a name for the Switch.

TCP Ports – Choose any three TCP ports between ports 800 to 65535. When the Switch is a standalone system, the ports do not have to be consecutive. (The port numbers can be changed from Central Access Appliance, if needed.)

Notes

The firewall or router security access list must enable inbound communication through the selected TCP ports for the Switch’s IP address.

For client computer access from a secured LAN, the selected ports should be open for outbound communication.

OmniViewIP 5216K/5232K 17