Belkin IP 5232K, 5216K Security Settings, Web Interface, sections, Password Policy, Standard

WEB INTERFACE

Table of Contents sections 1 2

Security > Settings

Configure the security features, such as Account Blocking, Password Policy, and Idle Timeout, as explained below.

From the Security section, click “Settings”. The “Security > Settings” page appears (see Figure 20).

Figure 20 Security Settings

Security Settings fields:

Account Blocking – Decide on the number of attempts to log in with a wrong user name or password, after which there is a time lock or a total block.

3 4 5 6

Password Policy

For local and remote users, you have the option of a standard or high security level of password. The table below shows the parameters of the two options.

Standard	High security policy
security policy
6 characters or	8 characters or more, must include at least 1
	digit and 1 uppercase letter, and 1 “special”
more
	character as follows: !@#$%^*()_-+=[]’:;?/
Must not include	Must not include the user name
the user name

Check the box to enable the high security password policy. If left unchecked, the standard security policy applies.

OSD password enabled – For the local user, access to the OSD can be password enabled or disabled (default), with the option of a standard or high security level of password as explained above. Select the check box to enable password.

Note! The user access permissions are the same whether access is done locally or remotely.

Idle Timeout – Select the timeout inactivity period after which the user is disconnected from the system. Choose “No Timeout” to disable timeout.

Click to save any security changes.

OmniViewIP 5216K/5232K 23