Belkin 5216K, IP 5232K user manual Manual settings, REmote AcCESS, sections

REmote AcCESS

Table of Contents sections 1 2

Manual settings

If the mouse settings on the target server were ever changed, or when the operating system on the target server is Windows XP, 2003 Server, Vista, or 2008 Server, or Linux, Novell, SCO UNIX®, or Sun Solaris, you must configure the mouse manually.

To manually configure the mouse:

1.From the toolbar, click “ / Manual Settings”. The “Mouse

Settings” dialog box appears (see Figure 32).

Figure 32 Mouse Settings Dialog box

3 4 5 6

2.Select the target server’s operating system and click “OK”. Instructions and sliders appear. Note: You must do this configuration on every port.

3.Follow the instructions and set any relevant sliders to the same values as set in the target server’s “Mouse Properties” window.

4.Check USB if the SIM you are using is USB type.

Click “OK”. The mouse pointers should be synchronized. There will be no need to perform this setup unless you change the server attached to the particular port.

OmniViewIP 5216K/5232K 36