Belkin IP 5232K Adding a user, Editing a user, Deleting a user, Blocking a user, Web Interface

WEB INTERFACE

Table of Contents sections 1 2

Adding a user

To add a user:

1.Click and type a name and a password. The password must be at least six characters (letters or numbers), and must not include the user name, even if other characters are added.

Note! The following “special” characters: &, <, >, ”, {, and } cannot be used for either the user name or password.

Depending on the security level chosen, the user name and password parameters are different. See the “Security > Settings” section on page 23.

2.Select the permission type from the “Permission” box.

3.Click and the user will appear in the list of users. The Permission column shows the user level (Administrator, User, and View Only). The Status column shows whether the user is blocked or unblocked (explained in the “Blocking a user” section).

3 4 5 6

Editing a user

To edit a user:

1.Select the user from the user drop-down menu.

2.You can now change all the parameters—user name, permission, password, and blocking status (see the “Blocking a user” section).

3.Click .. The changes are saved.

Deleting a user

To delete a user:

1.Select the user from the list.

2.Click ..

3.Click to save any changes.

Blocking a user

An alternative to deleting a user entry completely is blocking a user. This means that the user’s name and password is stored, but the user is unable to access the system. Check “Block” to block a user, and then

click to save any changes. Uncheck “Block” and click to allow the user access.

OmniViewIP 5216K/5232K 20