32
TROUBLESHOOTING
The mouse is not detected at boot-up.
• Check the cables and make sure that they are inserted correctly.
The computer boots up, but the mouse does not work.
• Make sure the mouse is plugged in properly.
• Make sure the mouse works when directly plugged into the computer.
Rebooting may be necessary when trying this.
• Try a different mouse.
When I switch from one port to another,mouse movement is
completely erratic.
• Make sure you do not have more than one mouse driver installed. Make
sure that the driver is either for a standard PS/2 mouse or a Microsoft
computer-compatible PS/2 mouse.
• Make sure you do not have any mouse drivers loaded in your CONFIG.SYS
or AUTOEXEC.BAT files.
• Avoid moving the mouse or pressing the mouse button when switching
ports on the PRO2.
• You can reset the mouse and resume proper mouse movement simply by
unplugging the mouse from the front of the PRO2 for about 2-3 seconds,
and then plugging it in again.