Belkin F1DP108Gea, F1DP116Gea user manual Network Configuration, Device Name, First TCP Port

Remote Installation

Step 3 Network Configuration

When first connecting to the Switch’s HTTPS configuration page, two browser security warnings may appear. Click “Yes” on both warnings.

Note: The first security warning only occurs once per client machine. This is when the Belkin root certificate is installed. The second warning can be avoided by adding a line to your Windows “hosts” file (typically at \winnt\system32\ drivers\etc\hosts —edit using Notepad). The line format should be “IP address any name.kvm.net”. (For example: 192.168.2.155BelkinSMB.kvm.net .)

Device Name

Type in a name you would like to assign the Switch. The default device name consists of the letter “D” followed by the 7-digit device number located on the back of the Switch.

First TCP Port

Choose three consecutive Transmission Control Protocol (TCP) ports, and type in the first port number of the series. The default port is port 900. This is suitable for the majority of installations.

Note: Your firewall or router security access list must enable inbound communication through the selected TCP ports for the Switch’s address. Ports 80 and 443 are used for standard Web communication and should be open. For client-computer access from a secured LAN, the selected ports should be open for outbound communication.

1

2

3

4	section
5

6

7

8

9

10

31