Belkin F1UP002 manual Installation Procedure

section

Installation Procedure

1

2

3

4

5

6

7

The Print Server will check if the manually configured IP

8address in “TCP/IP Configuration” is in the same subnet as the connected computer running the installation utility. If the TCP/IP-address settings configured manually

9	are in a different IP subnet than that of the connected
	computer, the user will be prompted by the alert message
10	shown below. Click “OK” to go back and configure the
	correct IP-address settings for the Print Server.
11

Note: If you want to change the TCP/IP settings of the Print Server at some point after the installation, you can use the Server-Manager utility’s TCP/IP- configuration option.

18