Belkin F1UP002 manual Configuring Wireless Settings, Channel

Installation Procedure

Step 3. Configuring Wireless Settings

1.The default wireless setting is “Auto” mode. The Print Server will detect a connection to a wired-LAN network through the attached Ethernet cable. If the Print Server is connected to a wired network, it will work in that network. To enable wireless mode, the Ethernet cable must be disconnected after final configurations. However, the Ethernet cable needs to stay plugged in for the required wireless configurations in this section. For more detailed information about wireless settings, refer to the “Wireless Configuration” section.

2.The “Wireless Network Settings” screen of the Print Server will automatically scan the wireless networks nearby. Select the wireless network to which you would like to connect and click “Next”. Alternatively, you can manually enter

the wireless-network information (“Manual” mode).

The default wireless settings are as follows: Mode: Infrastructure

SSID: Default

Channel: 11

1

2

3

4

5

6

7

8

9

10

11

section

19