Belkin F1UP002 manual Installation Procedure, Connecting Devices to your Print Server

section

Installation Procedure

1Step 1. Connecting Devices to your Print Server

2

Before you start, you should have:

3• One computer with Windows 2000 SP4 or above, or Windows XP SP1 or above

4• One MFP or standard printer with a USB port and an installation CD

5• One Category 5 Ethernet cable

• One USB cable (not included—usually comes with printer)

6

	1.	Unpack the Print-Server package and verify
7		that all the items listed are provided.
	2.	Connect the Print Server to your network by attaching one

end of the network cable to the Print Server’s network

8port and the other to an available port on your router.

9

10

11

3.Plug one end of the power adapter to the Print Server and the other into an electrical outlet. The Print Server will perform a Power-On Self-Test (POST) after it is powered on. When the

Status LED light goes off, the Print Server is ready.

10