Back view of OmniViewPRO

F1D116_OSD_AM_man.qxd 4/20/00 4:07 PM Page 8

Hardware Installation (continued)

3. Connect the monitor to the OmniViewPRO. Using the attached cable, or the one included with your monitor, connect it to the HDDB15 female port on the back of the OmniViewPRO, this part is labeled with the monitor symbol and is at the CONSOLE section.

PC16

PC15

PC14

PC13

PC12

PC11

PC10

PC9

SW

PC7

PC6

PC5

PC4

PC3

PC2

PC1

PC8

4. Connect the keyboard and mouse to the OmniViewPRO. If you have an AT-style keyboard, you will need an AT-PS/2 adapter (Belkin Part# F2N017).

Back view of OmniViewPRO

PS/2 Mouse

PS/2 Style Keyboard

5. Connect the first computer's VGA cable to the OmniViewPRO. Using the VGA cable (Belkin Part# F2N025-XX-T or A3H981-XX), connect the male end of the cable to the VGA port on the computer, and the female end to the PC1 VGA port at the back of OmniViewPRO.

Back view of OmniViewPRO

Back of PC

F3H981-XX-T

or

F2N025-XX-T

8

Page 10
Image 10
Belkin manual Back view of OmniView PRO PS/2 Mouse PS/2 Style Keyboard