F1D116_OSD_AM_man.qxd 4/20/00 4:07 PM Page 13

Usage (continued)

En

Bank 0 (Master)

Bank 1 (Slave)

Bank 2 (Slave)

 

etc...

etc...

 

Bank 4 (Slave)

AutoScan Mode:

Enable AutoScan mode

To enable AutoScan mode, press [SCROLL LOCK] [SCROLL LOCK] [0] [0]. In AutoScan mode, the OmniViewPRO remains on one port for a number of seconds, before switching to the next. This time interval is set in the On-Screen Display menu.

NOTE: There is no mouse or keyboard control in this mode. This is necessary to prevent errors. Otherwise, if the user is moving the mouse or using the keyboard when the OmniViewPRO switches to the next port, data flow is interrupted and will cause erratic mouse movement and/or the wrong characters to show up when using the keyboard.

To get out of AutoScan mode, press the SPACEBAR.

13

Page 15
Image 15
Belkin PRO manual Usage