Installation3
WARNING
To avoid electrocuting yourself or damaging the Thermoglaze, never allow water, steam, cleaning solution, or other liquid to enter the electrical panels or connections
Electrical:
Model | Dimensions | Power Requirements |
TG21586 | 88"L x 40W x | See data tag |
63"H | ||
|
|
|
Make sure that the power requirements of the Thermoglaze, shown on the data plate, match your power source.
Only plug in to power source that matches the required voltage and current for the Thermoglaze. (The Thermoglaze unit TG50 comes standard with a Hubbel 360P6W plug that needs a 360C6W socket or equivalent for electrical current.
Thermoglaze must be electrically grounded and connected in compliance with the National Electrical Code,
Do not apply electrical power to the system until the assembly has been completed. See Section 4 for the assembly of the Thermoglaze.
Venting:
Local codes prevail. The authorities having jurisdiction are stated in NFPA
Building Layouts:
Specification sheets and AutoCAD drawings for use in developing architectural drawings can be provided by request. Please call your Belshaw Bros., Inc. representative for help in defining your requirements.
Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone
4 | Thermoglaze 50 |
