BenQ 5000G Series user manual Associating Application Programs with Power Profiles, Speed

3. The following QPower window will appear.

4.Click to select a profile from the Profiles box. When a profile is selected, its description will appear in the Profile description box below.

5.Adjust settings from the Settings box on the right by selecting options from the drop-down menus, or dragging sliders to a different position.

Please refer to the table below for the description about the setting items available in the Settings box.

Item		Description			Note
	Standby	For specifying the period of inactiv-
	Timer	ity before the Joybook	goes on
		standby.
	Hiber-	For specifying the period of inactiv-
	nation	ity before the Joybook hibernates.
System	Lid	For specifying the action	the Joy-
		book performs when you close the
	Close
		lid.
				The higher the
	CPU			CPU	speed,
		For adjusting the speed of the CPU.		the	more	the
	Speed
				power it		con-
				sumes.

			The higher the
	Bright-	For adjusting the brightness level of	screen	bright-
	ness	the screen.	ness, the more
			the power		it
Display			consumes.
	Turn-off	For specifying the period of inactiv-
		ity before the Joybook turns off the
	timer	screen.
	Screen	For specifying the period of time
	Saver	before the screensaver activates.
HDD	Turn-off	For specifying the period of inactiv-
	Timer	ity before the Joybook turns off its
		hard disk.
			Select	Don't
			Care if you do
			not	want
		For specifying the status of the	QPower		to
Miscella-	CIR	Infrared port of the Joybook.	change	the
neous		This option may not be available on	Infrared	port
		certain Joybook models.	status when		a
			different	power
			profile		is
			selected.

6. Click the button to save the settings. You can also click the

button to cancel, or the button to reset all settings to their default val- ues.

Associating Application Programs with Power Profiles

By default, some application programs installed in your Joybook are already asso- ciated with certain power profiles of QPower. For example, when you open the Window Media Player program, the DVD power profile will be applied automati- cally. You can add, remove or change the programs that are associated with the power profiles following the steps below.

1.Right-click on the QPower profile icon on the Windows System Tray.

2.Select Configuration... from the menu that appears.

3.The QPower window will appear.

32 Using the Q-Media Bar