Remote paging operations

Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connecting a computer" on page 23 for details.

You can operate your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) by pressing PAGE / on the remote control.

If remote paging function doesn't work, check if the USB connection is correctly made and the mouse driver on your computer is updated to the latest version.

The remote paging function cannot work with Microsoft® Windows®98 operating system. Windows®XP or higher operating systems are recommended.

Freezing the picture

Press FREEZE on the remote control to freeze the picture. 'FREEZE' will display in the upper right corner of the screen. To release the function, press any key (except LASER) on the projector or remote control.

Even if a picture is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the picture is frozen on screen.

Locking control keys

With the control keys on the remote control and projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Key Lock is on, no control keys on the remote control and projector will operate except LASER and EXIT.

To lock the keys:

•Using the remote control

Press KEY LOCK on the remote control. The control keys lock.

•Using the OSD menu

1.Press MENU and then press / until the Advanced Setup menu is highlighted.

2.Press to highlight Key Lock, and press ENTER. The control keys lock.

To unlock the keys, press and hold EXIT on the projector for 5 seconds or press EXIT on the remote control.

Advanced Setup

Lamp

 

Audio

 

Pattern

 

High Altitude Mode

Off

Password

 

Key Lock

ENTER

Reset All Settings

 

Analog RGB

EXIT Back

56 Operation