Controls and functions

Projector

1.Focus ring

Adjusts the focus of the projected picture. See "Fine-tuning the picture size and clarity" on page 36 for details.

2.Zoom ring

Adjusts the size of the picture. See "Fine-tuning the picture size and clarity" on page 36 for details.

3.Power indicator light

Lights up or flashes when the projector is under operation. See "Indicators" on page 73 for details.

4.MENU

Turns on the On-Screen Display (OSD) menu. When the OSD menu is activated, exits and saves the menu settings. See "Using the menus" on page 31 for details.

5.Power

Toggles the projector between standby mode and on.

See "Starting up the projector" on page 30 and "Shutting down the projector" on page 57 for details.

12 Introduction

6.MODE

Depending upon which input source is selected, selects an available picture setup mode. See "Picture Mode" on page 61 for details.

7.SOURCE

Displays the source selection bar and makes selection. See "Switching input source" on page 35 for details.

8.AUTO

Automatically determines the best picture timings for the displayed picture.

See "Auto-adjusting the picture" on page 36 for details.

9.Temperature warning light

Lights up if the projector's temperature becomes too high. See "Indicators" on page 73 for details.