Shutting down the projector

1.Press II Power on the remote control or

projector and a confirmation message will display prompting you.

If you don't respond in a few seconds, the message will disappear.

2.Press Power a second time. The Power indicator light flashes orange, the

projection lamp shuts down, and the fans

Power Off

will continue to run for approximately 90

 

seconds to cool down the projector.

 

To protect the lamp, the projector will not respond to any commands during the cooling process.

3.The Power indicator light is a steady orange once the cooling process has finished and fans stop.

4.Disconnect the power cord from the wall

socket.

To save your time, you can unplug the projector as soon as it is turned off without waiting for the cooling time. The projector will continue cooling down even if it is unplugged so that you can pack up the projector and go. During the projector's off-line cooling, you cannot restart it.

Press again to power off.

Press any other button to cancel.

Operation 57