Timing of replacing the lamp
When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See "Indicators" on page 73 for details.
The following Lamp warning displays will remind you to change the lamp.
Status | Message | |
The lamp has been in operation for 3000 hours. | WARNING | |
Install a new lamp for optimal performance. If the | ||
NOTICE: Order replacement lamp | ||
projector is normally run with Eco. selected (See | ||
| ||
Lamp > 3000hrs | ||
may continue to operate the projector until the | ||
Projector will stop at 4000hrs | ||
3950 hour lamp warning appears. |
| |
Press ENTER to dismiss the message. | OK | |
|
| |
The lamp has been in operation for 3950 hours. It | WARNING | |
is strongly recommended that you replace the lamp | ||
NOTICE: Order replacement lamp | ||
at this age. The lamp is a consumable item. The | ||
| ||
lamp brightness diminishes with use. This is | Lamp > 3950hrs | |
normal lamp behavior. You can replace the lamp | Projector will stop at 4000hrs | |
| ||
whenever you notice that the brightness level has |
| |
significantly diminished. If the lamp is not | OK | |
replaced beforehand, it should be replaced after | ||
| ||
3950 hours usage. |
| |
Press ENTER to dismiss the message. |
| |
|
| |
The lamp has been in operation for 4000 hours. | WARNING | |
The lamp MUST be replaced before the projector | ||
NOTICE: Replace lamp now | ||
will operate normally. | ||
Press ENTER to dismiss the message. | Lamp > 4000hrs | |
| ||
| Replace lamp (refer to User Manual) | |
| OK | |
|
|
Maintenance 69