BenQ SP831 Connecting a Component Video source device

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device through a Component Video cable:

1.Take a Component Video cable and connect one end to the Component Video output sockets of the Video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue; and red to red.

2.Connect the other end of the Component Video cable to the COMPONENT sockets (Y, Pb/Cb, Pr/Cr) on the projector. Match the color of the plugs to the color of the

sockets; green to green, blue to blue; and red to red.

The final connection path should be like that shown in the following diagram:

AV device

i

i.Component cable

• Component Video is the only video input that delivers native 16:9 aspect ratio picture.

•If the selected video picture is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

Connection 27

Contents

SP830/SP831 Digital Projector User Manual Table of contents Important safety instructions Introduction Positioning your projector Connection Maintenance Troubleshooting Specifications Warranty and Copyright information Regulation statements 1. Important safety instructions Page Page Ceiling mounting the projector 2. Introduction Projector features Page Projector exterior view Controls and functions Projector Remote control Page Operating the LASER pointer Making the remote control a wired control Remote control effective range Installing remote control batteries 3. Positioning your projector Choosing a location Obtaining a preferred projected picture size How to determine the position of the projector for a given screen size How to determine the recommended screen size for a given distance Projection dimensions Page Page 4. Connection Connecting a computer Connecting a monitor Connecting Video source devices Connecting a DVI source device Connecting a Component Video source device Page Connecting Audio device 5. Operation Starting up the projector Using the menus Securing the projector Using a security cable lock Utilizing the password function Setting a password If you forget the password Changing the password Disabling the password function Switching input source Auto-adjustingthe picture Fine-tuningthe picture size and clarity Correcting picture distortion Correcting pincushion distortion and barrel distortion Two parallel sides No parallel sides Pincushion/Barrel correction Page Page Magnifying and Searching for details on the projected picture Selecting a picture mode Fine-tuningthe selected picture mode Setting the User 1/User 2/User 3 mode Renaming user modes Resetting the picture mode Fine-tuningthe picture quality Advanced picture quality controls Selecting a color temperature Setting a preferred color temperature Color Management Selecting a Gamma setting Color Space Transfer Operating in a high altitude environment Hiding the picture Displaying more than one picture source simultaneously Splitting the screen PIP (Picture In Picture) operation Split Screen and PIP source conflict list Disabled functions for the active windows The Split Screen display way Creating your own startup screen Personalizing the projector menu display Adjusting the sound Remote paging operations Freezing the picture Locking control keys Shutting down the projector Menu operation On-ScreenDisplay menu structure Display System Setup Setup Information Picture --Basic menu Picture --Advanced menu Display menu System Setup menu Advanced Setup menu Information menu 6. Maintenance Care of the projector Cleaning the lens Cleaning the projector case Storing the projector Lamp information Getting to know the lamp hour Extending lamp life Timing of replacing the lamp Replacing the lamp Page Resetting the lamp timer Indicators 7. Troubleshooting The remote mouse function does not work The picture contains static or noise 8. Specifications Projector specifications Timing chart Supported timing for PC (including DVI-I)input Supported timing for Component Video input Dimensions 9. Warranty and Copyright information Limited warranty Copyright Disclaimer 10. Regulation statements FCC statement EEC statement MIC statement WEEE directive