Switching input source
The projector can be connected to multiple devices at the same time. When starting up, the projector automatically search for the available signals.
Be sure the Auto Source Search function in the System Setup menu is On (which is the default of this projector) if you want the projector to automatically search for the signals.
You can also manually cycle through the available input sources.
1.Press SOURCE on the projector or remote control. The source selection bar displays. (Pressing ENTER in the System Setup > Input Source menu performs the same function.)
2.Press 
/
repeatedly until your desired signal is selected and press ENTER.
Once detected, the selected source information will display in the corner of the screen for 3 seconds. If there is multiple equipment connected to the projector, you can press the key again to search for other signals.
The projector feature Split Screen and PIP functions which allow 2 different signals to be displayed at the same time. See "Displaying more than one picture source simultaneously" on page 51 for details.
The brightness level of the projected picture will change accordingly when you switch between different input sources. Data (graphic) "PC" presentations using mostly static pictures are generally brighter than "Video" using mostly moving pictures (movies).
The input source type effects the options available for the Picture Mode. See "Selecting a picture mode" on page 42 for details.
System Setup
Language |
| English | ||
Splash Screen |
| BenQ | ||
My Screen |
|
| ||
Projector Position |
| Floor Front | ||
Blank Timer |
| Disable | ||
Auto Off |
| Disable | ||
Sleep Timer |
| Disable | ||
Background Color |
| Blue | ||
Menu Settings |
|
| ||
Input Source |
| ENTER | ||
Auto Source Search |
| On | ||
Analog RGB |
| EXIT Back | ||
|
|
|
|
|
Analog RGB
Component
Video
Select
Operation 35