Displaying more than one picture source simultaneously

Your projector is capable of displaying pictures simultaneously from two input sources, which can be used to enhance your presentation in an interesting way.

Ensure the signals you want to display are correctly connected to the projector.

Splitting the screen

The projector is able to display two input sources by dividing the projection equally into two screens on the left and right sides. That is each source uses 640 x 768 pixels at most of the projection. To display the split screen:

•Using the projector or remote control

Press on the projector or SPLIT SCREEN/ ON on the remote control to split the projection screen and press further until a desired way of display is selected.

To restore the projection to one big screen, press

or SPLIT SCREEN/OFF.

•Using the OSD menu

1.Press MENU and then press / until the Display menu is highlighted.

2.Press to highlight Split Screen and press ENTER. The Split Screen page displays.

3.Highlight Split Screen and press / to select On.

The projector will select two currently active signals to display and the last viewed picture will be displayed on the right side as a main source.

See "Split Screen and PIP source conflict list" on page 53 for the conflict source combinations.

4.To change the Left Source or Right

Source, press to highlight Left Source or Right Source, and press ENTER. The source selection page displays.

Display

Aspect Ratio

 

Fill

Digital Screen Shift

0

 

 

Keystone

 

 

 

Attachable Lens

 

Off

Position

 

 

 

Overscan Adjustment

0

 

 

Digital Zoom

100%

 

 

Pan

 

 

 

PIP

 

 

 

Split Screen

 

ENTER

 

PC & Component YPbPr Tuning

Analog RGB

 

EXIT Back

Split Screen

Split Screen

On

Split Screen Relationship

Equally Split

Left

 

Right

 

Active Window

Right

 

EXIT Back

5.

Use / to highlight the source you want to display for the left or right window, and

 

press ENTER to save the setting and go back to the Split Screen page.

6.To make OSD settings to one of the two sources (Left or Right), highlight Active

Window, and press / to select the source you want to make adjustments.

The settings made on the OSD menus will only take effect on the active window. See "Disabled functions for the active windows" on page 53 for exceptions.

7.To change the way the pictures are displayed, highlight Split Screen Relationship and

press / to select a desired way. See "The Split Screen display way" on page 53 for details.

Operation 51