Advanced picture quality controls
There are more advanced functions in the Picture
Highlight Black Level and press 
/ 
on the projector or remote control to select 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some areas which use NTSC TV standard, the grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in other areas which use PAL equipment or Japanese NTSC standard, the grayscale is measured from 0 IRE (black) to 100 IRE (white). We suggest that you check the input source if it is with 0 IRE or 7.5 IRE, then select accordingly.
Picture
Black Level | 0 IRE |
Clarity Control |
|
Color Temperature | Normal |
Color Temp User_ Fine Tuning |
|
Gamma Selection | Gamma 2 |
Color Management |
|
Color Space Transfer | RGB |
Signal Shuttle |
|
Analog RGB | EXIT Back |
You may have static or noisy projected pictures.
To achieve better picture clarity:
1.Highlight Clarity Control and press ENTER on the projector or remote control to display the Clarity Control page.
2.Press 
/
to select the item you want to adjust and press 
/ 
to set the desired value.
•Noise Reduction: Reduces electrical image noise caused by different media players. The higher the setting, the less the noise.
•Detail Enhancement: Sharpens the image. The higher the setting, the more details the image reveals.
•LTI (Luminance Transmission Improvement): Enhances picture brightness. The higher the setting, the more distinct the effect.
•CTI (Chroma Transmission Improvement): Reduces color smear. The higher the setting, the more distinct the effect.
Picture
Black Level |
| 0 IRE |
| |
Clarity Control |
| ENTER |
| |
Color Temperature |
| Normal |
| |
Color Temp User_ Fine Tuning |
| Gamma 2 |
| |
Gamma Selection |
|
| ||
Color Management |
|
|
|
|
Color Space Transfer |
| Default |
| |
Signal Shuttle |
|
|
|
|
Analog RGB |
| EXIT | Back | |
Clarity Control |
|
|
|
|
Noise Reduction | 0 |
|
|
|
Detail Enhancement | 5 |
|
|
|
LTI | 0 |
|
|
|
CTI | 0 |
|
|
|
|
|
| EXIT | Back |
46 Operation