Fine-tuning the picture quality

No matter what picture mode you have selected, you are able to fine-tune those settings to fit every presentation purpose. Those adjustments will be saved to the preset mode you are at when you exit the OSD menu.

Adjusting Brightness

Highlight Brightness in the Picture -- Basic menu and

adjust the values by pressing / on the projector or remote control.

The higher the value, the brighter the picture. And lower the setting, darker the picture. Adjust this control so the black areas of the picture appear just as black and that detail in the dark areas is visible.

+30

 

 

+50

 

 

+70

Adjusting Contrast

Highlight Contrast in the Picture -- Basic menu and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

adjust the values by pressing

/

on the projector or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+30

 

 

 

 

+50

 

 

 

 

 

+70

The higher the value, the greater the contrast. Use this

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to set the peak white level after you have previously

 

 

 

 

 

 

 

 

 

 

 

 

 

 

adjusted the Brightness setting to suit your selected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

input and viewing environment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjusting Color

Highlight Color in the Picture -- Basic menu and adjust the values by pressing / on the projector or remote control.

Lower setting produces less saturated colors; setting to the minimum value makes the image black and white. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic.

Adjusting Tint

Highlight Tint and adjust the values by pressing / on the projector or remote control.

The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes.

Adjusting Sharpness

Highlight Sharpness and adjust the values by pressing

/

on the projector or remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

The higher the value, the sharper the picture becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+30

 

 

 

 

+50

 

 

 

 

+70

The lower the value, the softer the picture becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

Operation 45